A chain-link fence isn’t an invention anymore. Regardless of where you live, it is most likely you have come across a chain-link fence more than once.
Logically, it can assume the role of a protector. The major helping factor attached to a chain-linked fence is “Security”.
Truth be told, this isn’t a gun that can scare away thieves or an iron shield that can take in bullets, this is just another type of fence that gives you a chance of a clearer view of what’s out the street, unlike a normal fence that restricts your sight.
Several times, a chain-link fence has been extra developed to have more helping power by adding a barbed wired to prevent unwanted entries but aside from these factors, a chain-link fence is just another type of fence that gives you a better view of the streets.
Table of Contents
Can You Install a Chain Link Fence on Uneven Ground?
A big yes! Installing a chain-link fence in a sloppy area isn’t so much of a stress. It is a little trick of having your polls erected to ensure a clean look is gotten.
Installing a chain-link fence requires paying close attention to details, a to-do list of how the installation process is, and a set action plan.
Materials Needed to Install Chain Link Fence on Uneven Ground
- Cement
- Metal clips
- Metal crowns
- Shovel
- Fence poles (concrete or metallic)
- Chain link (Has a varying length depending on what area of the property is to be used)
- Length of strings and levels
How to Install a Chain Link Fence on Uneven Ground
To install your chain-link fence, there are four major processes needed they include:
Fencing Preparation
Jumping over to installing your chain-link fence isn’t the right way to get started. It is right that you make a few PRE-INSTALLATION processes before getting started.
- Ensuring all necessary documents and paper works are ready before fencing is a crucial part of the preparation.
- I advise you read about the fencing law in your location to avoid being a victim of the law.
- Map out the perimeters lines where your fence will be erected. Having the perimeters mapped out before getting started helps to make the work easier and faster to complete.
Installing Fencing Posts
A post as an anchor to erect your chain-link fence is needed. Two different fence posts are required on the land. Erect a terminal post at the corner ends of your land and a line post that stays in between the terminal post, with each owning a larger and smaller diameter, respectively.
The installing process includes:
- Buy or get a fence post spacing chart.
- Check for the approved line spacing for the type of fencing post you are using.
- With a shovel, dig out the location of each post after marking them out with stakes.
- Ensure the terminal post is about 10” and 12” in diameter at the top and bottom respectively, ensuring a minimum of 2” height than the chain link.
- Ensure the line post is about 8” and 10” in diameter at the top and bottom respectively, ensuring a minimum of 2” heightened than the chain link.
- Mix the cement and pour it into the terminal hole. Appropriately position the fence poles into the terminal hole and allow drying off.
- Use a strong sting tying from one terminal pole to the other. Ensure it’s 4” below the top of your terminal post.
- On the uneven ground, align the line post with the string line. Ensure someone equally positioned all line posts. Most especially, you give a special look at the uneven grounds to ensure they are well-positioned.
- After installing the fence, give it a minimum of 24hrs to have the cement dry off to keep the pole firm to the ground.
Installing chain Links
To install a chain link fence on uneven ground,
- Carefully unroll the chain link. You can begin with unrolling about one foot.
- Select a terminal post and install it by attaching the edge of the chain link fiber to it using wires and lashes.
- Install the chain link to another terminal post by stretching it and also attaching your metal latches.
- Repeat the process until the perimeters are covered.
- Keep it neat by cutting out the chain-link structures spanning the uneven ground.
- Attach the chain crown to all fence poles until you have covered all the perimeters
- Stare at the wonderful work you just concluded.
Should Chain Link Fence Touch the Ground?
It shouldn’t be a big deal if you decide you want your chain-link fence touching the ground, but it is never a recommendation to have it touching the ground.
Giving your chain fence a chance to touch the ground makes it hard to maintain because of its easy access to moisture directly from the ground, which is likely to cause gradual damage to the metal pole.
There are various choices and desires too why some prefer their chain fence touching the ground, while a majority feels it is more profitable and sustainable with the chain fence slightly above the ground level.
What to Know Before and When Installing Chain Link Fence on Uneven Ground
To make fencing easier and faster, mapping out your pole location is important before installing your chain-link fence. It helps in minimizing time and effort.
Also, legal rules must be obeyed. Ensure you read through the fencing law of your jurisdiction before erecting a chain-link fence.
During installing your chain-link fence on uneven ground, due to how sloppy the land is, it should call for more focus to post erection to be sure each terminal polls are equally erected and each properly chained. Check out: California Pool Fence Law and requirement.
Conclusion
It can either be a decision of yours to get your chain-linked fence done without the help of a professional and it can be a quest for knowledge to be sure it is possible to be done without the help of a professional. It may seem frustrating or quite intimating to install a chain fence more so on uneven ground.
You shouldn’t freak out about the above-listed details. A notable look into details with an understanding of the installation process and the don’ts attachments can help you get it done without having to go hunting for professionals. But if you cannot do it yourself, please, call the professionals.
